Cycloidal pinwheel reducer is usually a up-dated of innovative type transmissing machine made with K-H-V less pearly whites engagement and the cycloidal pin steering wheel clenching mechanism, which are widely used in drive and reducing of textile and dying, foodstuff, mining and metallurgy, Essential oil and chemical project machinery etc, cranes, Market and conveyors. various fields.
Features:
1. Gear is constructed of high durability low carbon alloy steel by carburizing and quenching. The hardness of tooth surface area can reach HRC58-62. CNC grinding technology is adopted for all good contact performance, with high accuracy and gears
2. high transmission productivity: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable procedure and low noise;
4, compact structure, light-weight, long service life and high bearing ability;
5. easy to disassemble, assemble and check.
Operation specifications and precautions
1.High modularization design: various equip with various engine or other power input conveniently.Same machine type may equip with many power motor. It really is easy to know the combination and
junction between every machine type.
2.Transmission ratio: okay division, wide scope. The combined equipment type may form large transmitting ratio, i.e. output very low rotary speed.
3.Form of set up: the position to be installed is not limited.
4.High strength, small: the box body is made of great strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and excellent grinding process, which means bearing ability of unitvolume is huge.
5.Long life: Beneath the condition of right type chosen (including choosing suitable operation parameters)normal operation and maintenance, the life of main parts of speed reducer (except sporting parts) shouldn’t be significantly less than 20000 hours. The wearing parts include lubricating bearing, oil seal and essential oil.
6.Low noise: because main elements of speed reducer are processed, assembled and tested critically,therefore the noise of speed reducer is low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer
1. High speed ratio and efficiency
Single stage transmission can reach to 1 1:87 of speed-downwards ratio and the efficiency is normally a lot more than 90%. If make use of multi-speed get the speed-down ratio can be bigger.
2. Compact
Being adapted epicyclic transmitting principle, the input and output shaft are in same axis middle, it is compact.
3. Smooth and secure run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the device part is stable, the vibration and noise is limited at the minimum content.
1. Large deceleration ratio
A higher deceleration ratio of 1/30-1/320 can be obtained.The structure is simple, but it can know high reduction ratio gadget.
2. Small gear clearance
The Travel, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are engaged as well, and there are several gears engaged with 180 degree symmetry. Therefore, the effect of tooth pitch mistake and cumulative tooth pitch error on the rotation accuracy is relatively average, which makes the positioning precision and rotation accuracy reach a very high level.
4. Less parts, easy installation
The three basic components achieve a higher deceleration ratio, and they are all on the same axis, therefore the kit is easy to install and easy to shape.
5. Small in proportions and light in weight
Compared with the prior gear device, the quantity is 1/3, the fat is 1/2, but can obtain the same torque ability and reduction ratio, reaching small lightweight.
6 High torque capacity
Flexible wheel materials USES specialized steel with huge fatigue strength.Different from ordinary transmission product, the number of teeth meshing makes up about relevant to 30% of the full total quantity of teeth. Moreover, it is in get in touch with with the surface, to ensure that the pressure borne by each gear is reduced and substantial torque capacity can be obtained.
7 High efficiency
The sliding of gear meshing parts is very small, which reduces the power loss due to friction. Therefore, high lowering ratio may be accomplished while maintaining high effectiveness, and miniaturization of traveling motor can be realized.
8. Low noise
The gear meshing cycle swiftness is low, the transmission movement force balance, which means procedure is quiet, and the vibration is very small.
◆Large speed ratio and excessive efficiency single-stage transmission can achieve a deceleration ratio of 1 1:87, and the efficiency is a lot more than 90%. If multi-stage transmission can be used, the deceleration ratio will be larger.
◆Because planetary transmission theory is adopted, the input shaft and productivity shaft are on the same axis line, in order that the machine version can get the smallest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is 
larger, and the mechanism of balancing machine parts would make the vibration and voice limited to a minimum.
◆Reliable use and long service life as the main parts are made from large carbon chromium steel, excessive strength is certainly obtained by quenching (HRC58-62), and rolling friction is employed in some transmission contacts, therefore the service life is very long.
Cycloid reducer is certainly a cycloid needle teeth meshing planetary transmission principle drive models, is an excellent transmission has many advantages, versatile, and may be both negative and positive operation.
•Big ratio, and great efficiency Smooth operation,
• low noise The make use of reliable,
• long life can reach 50000 hours
• Main parts high-carbon the Ming-steel after quenching treatment (HRC58-62),
• operation and connection with rolling friction, basically very little wear, durable.
• Compact structure,
• little size Because the application of a planetary transmitting, the input shaft and the productivity shaft on the same axis, making the model to get the smallest possible size.
• Reasonable design, easy repair, and breakdown easily install,
• the least number of parts and also basic lubrication, cycloid reducer trusted by the user.
(1)Size above PL/PF120(including)high torque products adopt integral double wall planet pinion precision, improve the output strength and carrier.
(2).Hoop clamp coupling have five connection ways well suited for different application environments.
(3).Size over PL/PF120(incorporating)precision and high durability integral inner gear casing, processed in a single station,which eradicate the cumulative mistake and assembling error of split type.Remove casting process;adopt warm of forging process, which will decrease the blank material defects.
(4).The meshing equipment adopt shaving process after carburizing and quenching,which much easier to make gear surface smooth and high accuracy,reduce the temperature rising caused by gear area gluing and friction.
This series worm-gear reducer was engineered after RV worm microreducer, that have a complete norm, wide speed for selection, and several mounting positions. Its effectiveness and mounting dime nsions conform the same sorts of foreign.
The combination of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, radiate heat efficiently, beautiful shape, low noise and compact structure.
Very good sealing and adaptability.Its combo with T gear reducer and MB/MBN variator can meet a myriad of speed requirement.