Electrical power UNITS FOR DOUBLE-SCISSORS LIFT

Common Description
Outfitted together with the zero leak bidirectional checking sole-noid valves, this power unit is intended for the operation of two independent circuits. Which are respectively to the main and subordinate platforms on the double scissors lift. Two cut-off valves are applied for reducing the machine manually in case of energy reduction. If far more independent circuits are required to your application please get hold of us for availability.
Remark: 1. Please consult our sales engineer to the diverse pump displacement, motor electrical power or tank capacity.
2. CSA or UL licensed motors are available on request.
Special Notes
one. The AC motor is of S3 duty cycle, which could only function intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean all of the hydraulic parts concerned ahead of set up of the electrical power unit.
three. Viscosity on the oil shoud be 15~46 cst,as well as the oil need to be clean and free of impurities,N46 hydraulic oil is advisable.
4. The energy unit really should be mounted vertically.
five. Check the oil degree in the tank immediately after the preliminary working of your energy unit.
6. Oil transforming is needed just after the initial a hundred operation hrs,afterwards when each 3000 hrs.