helical worm gear motor

Helical-worm gearmotors
Due to their style and from being combined with a helical gear stage, the helical-worm gearmotors S..DR.. have especially high efficiency. They are also extremely low-noise and therefore avoid high noise emission levels.
Low-noise continuous operation: equipment unit combination optimized with respect to efficiency
Do you anticipate a drive alternative to impress you using its high level of overall performance and efficiency? If so, we’d recommend our high-quality helical-worm gearmotors EP to you. These could be implemented separately in the modular program. In this helical worm gear motor manner, they offer you an enormous range of sizes, gear ratios and electric motor sizes.
However, their greatest power is usually their running smoothness and their incredibly low noise development. One thing is for certain – With the helical-worm gearmotors EP you are choosing a robust drive solution that you will hardly actually hear.
The overall concept also offers you many more practical product characteristics and benefits. Included in these are the significantly higher performance of the helical-worm combinations as opposed to single helical-worm gear products. This is one way you save additional energy in the operation of your systems and are in a position to noticeably reduce ongoing working costs.
You will receive the low-noise helical-worm gearmotors EP. – to suit your individual requirements – with a wide selection of AC motors. In addition, you can freely configure all the relevant properties. In this way, you can effectively utilize all the benefits provided by this combination of low-noise helical-worm gear unit and performance-optimized motor. Even greater variance may be accomplished because of the optional flange or foot-mounted style and by selecting between solid and hollow shaft.
Save money and time
By opting for among our gearmotors, you are already saving money and time with this selection and project planning. It is because our modular system enables a multitude of mixture options for gear products and motors. You can for that reason reduce operating costs, depend on a long service life and reap the benefits of simplified maintenance that is feature of our brand.
Helical-worm gear units
Helical-worm combinations with considerably better efficiency than one helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm gear units of series EP
AC motors
Combine the helical-worm equipment unit with this AC motors:
Characteristics
Quiet and dependable transmission of torque
High overload capacity
Hardened steel worm gear and bronze alloy worm steering wheel provide exceptional strength and lengthy service life.
Optional heavy duty bearings deliver high radial and axial load capacity
High strength cast iron casing (SK02050 – SK43125)
Lightweight, corrosion-resistant aluminum alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Obtainable in footed, shaft install or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear devices are helical/helical-worm combinations, so they are better than normal helical-worm equipment units. Because of their outstanding efficiency, these drives can be utilized in every commercial sector and customized to individual torque and quickness requirements. The reduction ratios afforded by the helical-worm equipment stage and the low noise levels during operation make these gearmotors ideal low-cost solutions for simple applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Because of the unique mixture of optimized worm wheel materials with unique lubricants, optimized shape, this powerful engine achieves high degrees of effectiveness and torque. The housing machined on all sides allows diverse mounting options. Dual chamber shaft seals are used as standard.
The reduced contour design helps it be suitable for implementing applications e.g. in the meals industry. The housing has no recesses, which simplifies cleaning – a particularly essential feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm, foot
Course 12 Helical and hardened and floor worm gears: Provides higher efficiencies and better torque capacity in smaller sized sizes.
Multiple Input Options: Integral gear motors, inch or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft installation, inch and metric output shafts, installation pilots and flanges provide an array of design solutions.
UNIBLOCK Housing: For optimum rigidity universal installation on five sides or via a torque arm.
Sealed for Washdown: Helps to keep contaminants and water out.
Worldwide Motor: Multiple leads and windings for worldwide multi volt/Hz requirements in addition modular design to accept brakes, encoders or pressured cooling.
EP equipment motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right position worm geared motors arranged new standards for reliability, performance and economy with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly design offers easy integration now and a truly future proof answer. The EP gear motor offers total versatility in mounting options includes shaft, base, encounter, and flange solutions. The engine terminal box can be mounted in substitute positions rotated in 90º steps around the electric motor frame providing for unparalleled integration options.
EP gear motors comply with UNITED STATES and International standards, including NEMA, IEC, CSA, and CE, the EP series permits worldwide acceptance, a genuine total remedy for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the EP series can be dirt tight and hose evidence,and can be used outdoors or in wet and dusty environments without the utilization of additional enclosures. Full rated output is offered by the output shaft of the unit.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connection Standard with CAGE CLAMP®
Additional features:
Connecting with Plug connectors.
With integrated inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
Because of the unique combination of optimized worm wheel material with particular lubricants and optimized shape, this powerful geared engine achieves high degrees of effectiveness and torque. The low contour design makes it ideal for implementing applications electronic.g. in the food industry. The housing does not have any recesses, which simplifies cleaning – an especially essential feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a wide selection of compact, heavy duty helical gear drives with extended life performance features and simplified maintenance. The use of condition of the art helical and worm gear combinations affords optimum overall performance fulfilling a multitude of ratio requirements. The 800 BR is usually functionally interchangeable with many major manufacturer’s drives.
SPECIFICATIONS
Double and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All products shipped pre-lubed for your unique installation position with KluberSYNTH UH1 6-460
Obtainable in NEMA C-face flanged and direct input
Projecting and hollow result shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white-colored (BK) and stainless epoxy finish (SBK)
Obtainable in hollow or projecting result shafts
Double and triple reduction ratios
Flanged or foot mounted
All models adaptable to flooring, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient small right-angle geared engine. A favorably priced substitute for the standard duties expected of a right-angle drive.
5 equipment sizes (S0 to S4).
Engine power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from i = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors obtainable with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear unit and AC engine are directly flange mounted, the pinion is on the engine shaft. This integrated small design can be an essential element for the high accuracy and the amazing stiffness of EP geared motors.
For vector-controlled inverter operation utilization of an incremental encoder is provided for as standard.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The amount of efficiency in Ever-Power high performance worm gearboxes and helical worm gearboxes is a lot more than 90%. All worm shafts are produced from case hardened alloy metal and the flanks are precision floor. The worm tires are made from unique wear-resistant bronze. Helical worm gears are equipped with a helical equipment. Worm gears with shrink disc, torque limiter, in addition to adjustable backlash styles are also component of our standard product range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Overall performance gearboxes in universal style. The housings are produced from high quality cast iron. The rugget wall space and inner ribbing ensure incredibly torsional stiff and noise dampening housings. The exterior ripping offers a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent procedure under rough circumstances
Above average lifespan
Housing produced from high quality grey cast iron with durable walls and internal ribbing
Severe torsional resistance and low noise
Case hardened worm shafts and worms with precision surface flanks
Worm wheels produced from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes built with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange installation or universal design
Output shaft available as solid shaft or hollow shaft
Shrink disc, torque limiter,as well as adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG