Consisting of a strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this energy unit is created to operate materials handling gear. The decreasing movement is achived from the solenoid valve with the lowering pace managed by an adjustable needle valve. The left and correct functions are outfitted that has a dual pilot operated test valve and cross-over relief valves.
Remark: Please check with our revenue engineer for your distinct pump displacement, motor energy or tank capability.
1. This power unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
2. Clean all the hydraulic elements concerned just before set up of the energy unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst, which should really also be clean and absolutely free of impurities.N46 hydraulic oil is suggested.
4. This electrical power unit ought to be mounted horizontal.
5. Check the oil degree while in the tank following the initial start of the energy unit.
six. Oil transforming is required just after the preliminary a hundred operation hours, afterwards after each 3000 hrs.
SNOW PLOW Energy UNIT